塑料模具的基本组成部分及其广泛应用

The basic parts of the plastic mold include the forming parts, including the die, the punch, and the various molding cores, all parts of the inner and outer surfaces of the molding products, the upper and lower ends, the side holes, the side fovea and the threads; the supporting and fixed parts, including the die plate, the fixed plate, the supporting plate, the cushion block, etc., are used to fix the die or support pressure; the guiding parts, including the guide columns, are used. 和导套来确定模具的机构运动的相对位置；抽芯零件，包括斜销滑块，用来拔动核心当模具打开，使产品删除。部分，包括推杆、推管、推块，推块，推环、推杆固定板、推板等，用于去除模具。笔记

模具采用标准模架的推广，它是由结构的基本组成、形态和尺寸已经标准化和系列化。模具型腔的加工可以根据产品的形状。The use of standard mold frame is beneficial to shorten the mold making cycle. 塑料模具的组成：模具的结构、模具和热成型模具简单；模具的结构、模具和模具更为复杂，以及模具零件也更。

Plastic mold function: mould base board (panel): its function is to fix the front die on it; the runner plate (water mouth plate): its function is to remove the material in the runner when the mold is opened; the fixed plate is fixed: its main function is to form the product with the B plate; the main function of it is to remove the product from the mold when the mold is opened.

在动模固定板的主要功能是形成与板共同作用的产物；垫板：其作用是加强对板的强度和固定部分的板；垫块：模具脚，方铁等。它的作用是使屋顶有足够的空间；顶板：它的主要功能是固定顶针推顶针通过注射机的顶杆在模具开启；动模板，下夹板，底板，其主要功能是修复等。在它的后模；引导和导向套：它们的主要功能是起导向作用，使前后模可以做所有的动作顺畅；主要作用是在模具开启推出产品。